Once the device has been connected to the designated network, the SIM status will turn solid blue. Once done, the indicator light will turn green and the device will reboot after. Step 7: The update on the settings may take a minute to complete. The default MNO profile is 100.Ĭhoose the type of sim card that you obtained from your sim card providerĬhoose the location where the device will be deployed. You would need to obtain this from your sim card provider if they require specific settings to use the sim card. Step 6: Follow the on-screen instructions to configure the following settings: Access Point Name (APN) A welcome page shall appear on your computer screen. Step 5: While the SIM status indicator is blinking, press the Mode button once and wait until the indicator light turns blue after 10 seconds.
INSTALL AND USE COOLTERM SERIAL
Step 4: Tap Re-Scan Serial Ports to select the uHoo Aura port, then press OK.
Please take note that the following screenshots apply for the CoolTerm software only. Step 3: Open the terminal software that you previously downloaded and tap Options. Step 2: Turn on the uHoo Aura by inserting one end of the USB cable on the device and the other end of the cable to your computer. If the SIM card is not inserted correctly, it may damage the electronics of the device. You must hear a click sound to make sure that the SIM card is properly inserted in the uHoo Aura before switching on the device. Step 1: Insert the SIM card into the SIM slot that is located on the side of the uHoo Aura device with the notch pointing upper right and the metallic stripe facing you. You may now begin with the configuration process by following the simple steps below:
INSTALL AND USE COOLTERM INSTALL
If you prefer to use CoolTerm, you can download and install the app for your:Ĭonfiguring the Cellular Settings of the uHoo Aura Computer with serial port terminal software such as CoolTerm installed.Micro-SIM card that supports LTE-M or NB-IoT connectivity.The below outlines the necessary resources for configuring the SIM Card settings: Make sure the SIM card is activated before setting up the uHoo Aura. This article shares with you the detailed steps to configure the type of network used by your SIM card and the APN settings required by your chosen telecom provider.īefore you begin with the configuration process, please source the correct type of micro-SIM card from telecommunication companies in your country, it needs to be a NB-IoT or LTE-M SIM Card. To be able to satisfy the demand for reliable indoor air quality monitoring and management especially in remote locations where there are strict connectivity requirements, uHoo Aura boasts its capability to transmit accurate indoor air quality data via SIM Cards.
0 kommentar(er)
